FASTENER BUYING MADE SIMPLE:

ADDITIONAL WASHER STYLES
For 20 years, Fastener SuperStore has operated on the principle that buying fasteners should be quick, painless and hassle free. We understand that our customers are busy professionals, juggling multiple tasks, each of which requires their most valuable resource – time. Our goal is to assist you on your fastener buying journey from start to finish.

Identifying the Right Additional Washer Style for Your Application

This guide will help you understand the various additional washer styles that we carry, and their functions. The guide also contains information on the naming structure used for these washer styles to help you navigate the complex nomenclature used in their product descriptions.

Washers are circular shaped fastener accessories with a hole in the middle through which a screw or bolt is inserted. They are most commonly used next to the surface areas that screws, bolts, or nuts are fastening through, under the screw or bolt head on one side and/or under the nut on the other side. They offer multiple benefits including adding thickness, creating spacing, and increasing the holding power of the connection by creating a larger weight bearing surface.

The following washers provide uses for different applications:

BEVELED WASHERS

Beveled Washers are square, flat surfaced washers with one end thicker than the opposite end in order to counterbalance with the angle of an “I” beam onto which it is installed.

Example of a Beveled Washer description:
3/4" Beveled Washers / Hardened Steel / Plain / Outer Diameter: 1.750" Minimum | Thickness: .313"

On this part, the “3/4” indicates the nominal bolt diameter it is designed to accommodate. It is a beveled washer with a minimum outside diameter of 1.750” and a thickness of .313”. It features an angled bearing surface designed to compensate for sloped structural surfaces, allowing the bolt head or nut to seat properly and distribute the load evenly. It is made out of hardened steel with a plain finish.

COUNTERSUNK FINISHING WASHERS

Countersunk Finishing Washers are a formed circular washer which is raised and shaped in a way that allows for a decorative appearance and additional bearing area when used with flat or oval head screws.

Example of a Countersunk Finishing Washer description:
#12 Countersunk Finishing Washers / Steel / Nickel / Outer Diameter: 21/32" | Thickness: 1/8"

On this part, the “#12” indicates the nominal screw size it is designed to accommodate. It is a countersunk finishing washer with an outside diameter of 21/32” and a thickness of 1/8”. It features a cup-shaped body with a countersunk center designed to accommodate a flat head screw, providing a finished appearance while distributing the load over a wider surface area. It is made out of steel with a nickel finish.

SEALING WASHERS

Sealing Washers, also known as EPDM Bonded Sealing Washers. A thin, conically shaped circular steel stamping with a centrally located hole, bonded to a similarly shaped rubber-like piece which has a slightly smaller outside and inside diameter. The rubber compacts as the screw is tightened creating a tight, waterproof seal.

Example of a Sealing Washer description:
5/16 EPDM Bonded Sealing Washers / 18-8 Stainless Steel / OD: 3/4

On this part, the “5/16” indicates the nominal screw or bolt diameter it is designed to accommodate. It is an EPDM bonded sealing washer with an outside diameter of 3/4”. It features a round stainless steel washer bonded to an EPDM rubber sealing layer that compresses against the mating surface to create a watertight seal and help prevent leaks. It is made out of 18-8 stainless steel with an EPDM rubber backing and a plain finish.

SHOULDER WASHERS

Shoulder Washers feature an extended sleeve on the internal surface, which is inserted into the adjacent material and allows the washer to insulate metal screws in electrical applications. It can also be used to reduce friction between parts.

Example of a Shoulder Washer description:
#6 Shoulder Washers / Nylon / Natural (White) / Outer Diameter: .323" - .333" | Thickness Range : .035" - .045"

On this part, the “#6” indicates the nominal screw size it is designed to accommodate. It is a shoulder washer with an outside diameter ranging from .323” to .333” and a flange thickness ranging from .035” to .045”. It features a round body with a raised shoulder that fits into a mounting hole to provide electrical insulation, spacing, and protection between the fastener and the surrounding material. It is made out of nylon in a natural white color.

If you have additional questions about washers, we’d love to be a resource for you. Contact us at [email protected], give us a call at (866) 688-2500 or use our live online chat in the upper right corner of this page!