FASTENER BUYING MADE SIMPLE:

FLAT WASHERS
For 20 years, Fastener SuperStore has operated on the principle that buying fasteners should be quick, painless and hassle free. We understand that our customers are busy professionals, juggling multiple tasks, each of which requires their most valuable resource – time. Our goal is to assist you on your fastener buying journey from start to finish.

Identifying the Right Flat Washers for Your Application

Washers are circular shaped fastener accessories with a hole in the middle through which a screw or bolt is inserted. They are most commonly used next to the surface areas that screws, bolts, or nuts are fastening through, under the screw or bolt head on one side and/or under the nut on the other side. They offer multiple benefits including adding thickness, creating spacing, and increasing the holding power of the connection by creating a larger weight bearing surface.

This guide will help you understand the various Flat washers that we carry, and their functions. The guide also contains information on the naming structure used for flat washers to help you navigate the complex nomenclature used in their product descriptions.

The following washers are flat shaped and circular with a hole in the middle:

DOCK WASHERS

A Dock Washer is a circular flat washer that is significantly thicker than most other washers and has greater surface area than even fender washers. Commonly used in dock construction.

Example of a Dock Washer description:
5/8" Dock Washers / Steel / Hot Dip Galvanized

On this part, the “5/8” indicates the nominal bolt diameter it is designed to accommodate. It is a dock washer with a large outside diameter that distributes the load over a wider surface area, helping prevent the bolt head or nut from pulling through the material. It features a flat, round body with a centered hole and is made out of steel with a hot dip galvanized finish.

FENDER WASHERS

A Fender Washer is a flat washer with a wider surface area than a USS or SAE washer. They are also made from a thinner gauge metal than most flat washers.

Example of a Fender Washer description:
1/4" x 1" Fender Washers / Steel / Zinc / Outer Diameter: 1" | Thickness Range : .051" - .080"

On this part, the “1/4” indicates the nominal bolt diameter it is designed to accommodate, while the “1” indicates its outside diameter. It is a fender washer with a large outside diameter relative to its hole size, designed to distribute the load over a wider surface area and help prevent the bolt head or nut from pulling through the material. It features a flat, round body with a centered hole and is made out of steel with a zinc finish.

MACHINE SCREW FLAT WASHERS

A Machine Screw Flat Washer is the smallest type of flat washer with an outside diameter equal to slightly twice the size of the inside diameter. Designed for use with machine screws in general industrial applications.

Example of a Machine Screw Flat Washer description:
#10 Machine Screw Flat Washers / Steel / Zinc Yellow / Outer Diameter: .433" - .443" | Thickness Range : .028" - .036"

On this part, the “#10” indicates the nominal screw size it is designed to accommodate. It is a machine screw flat washer with an outside diameter ranging from .433” to .443” and a thickness ranging from .028” to .036”. It features a flat, round body with a centered hole that distributes the load of a screw head or nut over a wider surface area, helping protect the material being fastened. It is made out of steel with a zinc yellow finish.

SAE FLAT WASHERS

An SAE Flat Washer is similar to a USS washer, but with slightly smaller inside and outside diameters. Most SAE washers are made from thinner materials than USS washers. Designed specifically to meet the requirements in the field of automotive engineering.

Example of an SAE Flat Washer description:
#8 SAE Flat Washers / Steel / Zinc / Made in USA / Outer Diameter: 7/16" | Thickness Range : .036" - .065"

On this part, the “#8” indicates the nominal screw size it is designed to accommodate. It is an SAE flat washer with an outside diameter of 7/16” and a thickness ranging from .036” to .065”. It features a flat, round body with a centered hole that distributes the load of a screw head or nut over a wider surface area, helping protect the material being fastened. It is made out of steel with a zinc finish and is manufactured in the USA.

USS FLAT WASHERS

A USS Flat Washer is similar to SAE washers, but with slightly smaller inside and outside diameters. Most USS washers are made from thicker materials than SAE washers. Designed to meet the majority of industrial applications in manufacturing, maintenance, and repair. 

Example of a USS flat washer description:
1/4" USS Flat Washers / Steel / Black Zinc / Outer Diameter: 3/4" | Thickness Range : .051" - .080"

On this part, the “1/4” indicates the nominal bolt diameter it is designed to accommodate. It is a USS flat washer with an outside diameter of 3/4” and a thickness ranging from .051” to .080”. It features a flat, round body with a centered hole that distributes the load of a bolt head or nut over a wider surface area, helping protect the material being fastened. It is made out of steel with a black zinc finish.

STRUCTURAL WASHERS

Structural Washers are dimensionally comparable to USS plain washers, but with a smaller outside diameter, manufactured from a higher grade of steel, and heat-treated. Designed to be used with A325 & A490 structural bolts.

Example of a Structural Washer description:
3/4" Structural Washers / F436-1 / Plain / Outer Diameter: 1.438" - 1.500" | Thickness Range : .136" - .177"

On this part, the “3/4” indicates the nominal bolt diameter it is designed to accommodate. It is a structural washer with an outside diameter ranging from 1.438” to 1.500” and a thickness ranging from .136” to .177”. It features a hardened, flat, round body with a centered hole that distributes the load of a structural bolt head or nut over a wider surface area. It is made out of ASTM F436 Type 1 steel with a plain finish.

THRU-HARD WASHERS

Thru-Hard Washers are SAE and USS washers which are manufactured from a higher grade of steel, are heat treated and conform to tighter tolerances on thickness.

Example of a Thru-Hard Washer description:
9/16" USS Thru Hard Washers / Steel / Zinc Yellow / Outer Diameter: 1 1/2" | Thickness Range : .086" - .132

On this part, the “9/16” indicates the nominal bolt diameter it is designed to accommodate. It is a USS thru-hardened flat washer with an outside diameter of 1 1/2” and a thickness ranging from .086” to .132”. It features a hardened, flat, round body with a centered hole that distributes the load of a bolt head or nut over a wider surface area while providing increased resistance to deformation under pressure. It is made out of steel with a zinc yellow finish.

If you have additional questions about flat washers, we’d love to be a resource for you. Contact us at [email protected], give us a call at (866) 688-2500 or use our live online chat in the upper right corner of this page!