FASTENER BUYING MADE SIMPLE:

SOCKETS
For 20 years, Fastener SuperStore has operated on the principle that buying fasteners should be quick, painless and hassle free. We understand that our customers are busy professionals, juggling multiple tasks, each of which requires their most valuable resource – time. Our goal is to assist you on your fastener buying journey from start to finish.

Identifying the Right Socket for Your Application

This guide will help you understand the various Sockets that we carry, and their functions. The guide also contains information on the naming structure used for these Sockets to help you navigate the complex nomenclature used in their product descriptions.

The term socket refers to the hex-shaped recess in the fastener. A hex key, also called an Allen wrench, or a hex bit fits inside that recess to turn the fastener. Because the tool engages from above, socket fasteners are useful in assemblies where there’s little room to fit a wrench around the head.

Socket cap screws come in four head styles. The right style depends on how much clearance you have above and around the head, whether the screw needs to sit flush, and what the joint requires. We also carry socket set screws, shoulder screws and pipe plugs, each of which serves a different purpose.

WHAT IS UNIFIED THREAD STANDARD (UTS)?

Unified Thread Standard (UTS) is the established standard for matching / mating fastener threads in the US and Canada, ensuring compatibility and consistency across applications. It is primarily used for certain types of screws, nuts, and bolts, providing diameter size and thread count guidelines to guarantee that these parts will work together properly.
UTS makes a further distinction between coarse threads –  Unified National Coarse (UNC), and fine threads - Unified National Fine (UNF). Depending upon the job, you will need to consistently use one or the other for matching sets of threads.
See Unified Thread Standard chart for common UNC and UNF sizes (diameter / thread count).

Screw Size UNC UNF
#00-80
#11-641-72
#22-562-64
#33-483-56
#44-404-48
#55-405-44
#66-326-40
#88-328-36
#1010-2410-32
#1212-24
1/4"1/4-201/4-28
5/16"5/16-185/16-24
3/8"3/8-163/8-24
7/16"7/16-147/16-20
1/2"1/2-131/2-20

SOCKET HEAD CAP SCREWS

A Socket Head Cap Screw has a tall, cylindrical head with a recessed hex drive. It’s commonly used in machinery, tooling and fixtures where the screw needs to clamp parts together and there’s enough clearance above the mounting surface for the head.

Example of a Socket Head Cap Screw description:
Socket Head Cap Screw
10-24 x 3/4" Socket Head Cap Screws / Alloy Steel / Black Oxide

On this part, the “10-24” indicates the diameter size and the thread count. It is a size 10 diameter with 24 threads per inch. The 3/4” indicates its length. It is driven by a hex (Allen) key, has a cylindrical socket head, and is made out of alloy steel with a black oxide finish.

BUTTON HEAD SOCKET CAP SCREWS

A Button Head Socket Cap Screw features a wide, rounded head, with a lower profile than a standard socket head. It’s commonly used on covers, panels and other visible surfaces where a smooth, rounded head is preferred. The head sits above the mounting surface.

Example of a Button Head Socket Cap Screw description:
8-32 x 3/4" Button Head Socket Cap Screws / Alloy Steel / Black Oxide

On this part, the “8-32” indicates the diameter size and the thread count. It is a size 8 diameter with 32 threads per inch. The 3/4” indicates its length. It is driven by a hex (Allen) key, has a low-profile, rounded button shaped head, and is made out of alloy steel with a black oxide finish.

FLAT HEAD SOCKET CAP SCREWS

A Flat Head Socket Cap Screw has an angled underside that fits into a matching countersunk hole. The top of the screw sits flush with the mounting surface. This is useful where a protruding head would interfere with another part.

Example of a Flat Head Socket Cap Screw description:
3/4-10 x 2 1/2" Slotted Flat Head Cap Screws / Steel / Zinc

On this part, the “3/4-10” indicates the diameter size and the thread count. It is a 3/4” diameter with 10 threads per inch. The 2 1/2” indicates its length. It is driven by a slotted screwdriver, has a flat shaped head designed to sit flush with the material surface when countersunk, and is made out of steel with a zinc finish.

LOW HEAD SOCKET CAP SCREWS

A Low Head Socket Cap Screw has a shorter cylindrical head than the standard style. It’s used where overhead clearance is limited and the mounting surface can accommodate a head that sits above it. Check the part specifications when replacing a standard socket head cap screw in a load-bearing joint, since the two styles can have different strength ratings.

Example of a Low Head Socket Cap Screw description:
5/16-18 x 3/4" Low Head Socket Cap Screws / Alloy Steel / Black Oxide

On this part, the “5/16-18” indicates the diameter size and the thread count. It is a 5/16” diameter with 18 threads per inch. The 3/4” indicates its length. It is driven by a hex (Allen) key, has a low-profile cylindrical socket head, and is made out of alloy steel with a black oxide finish.

SOCKET SET SCREWS

Socket Set Screws are headless fasteners commonly used to hold a collar, pulley or knob in position on a shaft. As the screw is tightened, its point presses against or engages a feature on the mating part. We carry cup, cone, flat, oval and half dog points. A cup point has a rim that bites into the mating surface, while a half dog point has a short cylindrical tip that can engage a matching hole or slot.

Example of a Socket Set Screw description:
10-32 x 3/8" Cone Point Socket Set Screws / Alloy Steel / Black Oxide

On this part, the “10-32” indicates the diameter size and the thread count. It is a size 10 diameter with 32 threads per inch. The 3/8” indicates its length. It is driven by a hex (Allen) key, has a headless, fully threaded body with a cone-shaped point designed to grip the mating surface, and is made out of alloy steel with a black oxide finish.

SOCKET SHOULDER SCREW

Also called stripper bolts, Socket Shoulder Screws have a smooth, unthreaded shoulder between the head and the threads. The shoulder provides a surface for a part to pivot, rotate or slide on. When selecting a shoulder screw, check the shoulder diameter, shoulder length and thread size separately.

Example of a Socket Shoulder Screw description:
5/8" x 2 1/2" Socket Shoulder Screws / 1/2-13 Thread / Alloy Steel / Plain

On this part, the “5/8” indicates the diameter of the unthreaded shoulder, while the “2 1/2” indicates its shoulder length. The “1/2-13” indicates the thread size and count, meaning it has a 1/2” nominal thread diameter with 13 threads per inch. It is driven by a hex (Allen) key, has a cylindrical socket head and a smooth, unthreaded shoulder designed to act as a bearing surface or pivot point, and is made out of alloy steel with a plain finish.

SOCKET PIPE PLUGS

Socket Pipe Plugs close threaded openings in pipes, fittings and equipment. The recessed drive allows installation where there’s limited clearance around the plug. Match the pipe thread size and type to the opening before ordering.

Example of a Socket Pipe Plugs description:
1/16" Flush Seating Socket Pipe Plugs / 7/8" Taper / Brass

On this part, the “1/16” indicates the nominal pipe thread size. It is a flush seating socket pipe plug designed to seal a threaded opening in a pipe or fitting. The “7/8” taper indicates the taper specification of the plug. It is driven by a hex (Allen) key, has a headless body designed to sit flush with the surface when installed, and is made out of brass with a plain finish.

HEX KEYS

Our Hex Keys are available in short-arm, long-arm and tamper-proof styles, with inch and metric sizes available. It's important to match the key to the fastener’s recess. The thread size in the product description tells you what the fastener mates with, while the drive size tells you which tool fits it.

Example of a Hex Key description:
1/8" Short Arm Hex Keys-Allen Wrenches / Alloy Steel / Black Oxide / Bulk Packaging


On
this part, the “1/8” indicates the width across the flats of the hex key, which determines the size of the hex socket it is designed to fit. It is a short arm hex key, also known as an Allen wrench, designed to tighten or loosen fasteners with internal hexagonal sockets. It features an L-shaped body with a shorter arm for use in confined spaces and a longer arm for increased leverage. It is made out of alloy steel with a black oxide finish and is sold in bulk packaging.

If you have additional questions about socket screws, we’d love to be a resource for you. Contact us at [email protected], give us a call at (866) 688-2500 or use our live online chat in the upper right corner of this page!