FASTENER BUYING MADE SIMPLE:

TINNERMAN® STYLE NUTS
For 20 years, Fastener SuperStore has operated on the principle that buying fasteners should be quick, painless and hassle free. We understand that our customers are busy professionals, juggling multiple tasks, each of which requires their most valuable resource – time. Our goal is to assist you on your fastener buying journey from start to finish.

Identifying the Right Tinnerman® Style Nuts for Your Application

There is an additional series of nuts that fall under the category of Tinnerman® Style Nuts. These parts all play unique and important roles in a variety of applications, and may not always be UTS.

This guide will help you understand the various Tinnerman® Style Nuts that we carry, and their functions. The guide also contains information on the naming structure used for Tinnerman® Style Nuts to help you navigate the complex nomenclature used in their product descriptions.

FLAT TYPE SPRING NUTS

A Flat Type Spring Nut is a one-piece, self-locking fastener made of spring steel. The perimeter of the nut is rectangular in shape. Some variations have an arched base and/or corners which are trimmed or turned.

Example of a Flat Type Spring Nut description:
(#10) C7000-10-4 Tinnerman Style Flat-Type Spring Nuts / Steel / Black Phos

On this part, the “#10” indicates the nominal screw size it is designed to accommodate. The “C7000-10-4” indicates the specific part number and configuration. It features a flat, spring steel body that grips the threads of a screw to create a secure fastening point without the need for a traditional threaded nut. It is a Tinnerman-style spring nut made out of steel with a black phosphate finish.

J TYPE SPRING NUTS

A J-Type Spring Nut is a self-retaining spring steel fastener manufactured in the shape of a “J”, enabling it to snap into place over the edge of a panel and hold its position.

Example of a J-Type Spring Nut description:
(6-32) C8019-632-4 Tinnerman Style J-Type Spring Nuts / Steel / Black Phos

On this part, the “6-32” indicates the diameter size and the thread count. It is designed to accommodate a size 6 screw with 32 threads per inch. The “C8019-632-4” indicates the specific part number and configuration. It features a J-shaped spring steel body that clips onto the edge of a panel or sheet metal, providing a secure fastening point without the need for a traditional nut. It is a Tinnerman-style J-type spring nut made out of steel with a black phosphate finish.

U TYPE SPRING NUTS

A U-Type Spring Nut is a self-retaining spring steel nut manufactured in the shape of a “U”, enabling it to snap into place over the edge of a panel and hold its position.

Example of a U-Type Spring Nut description:
(6-32) C8094-632-4 Tinnerman Style U-Type Spring Nuts / Steel / Black Phos

On this part, the “6-32” indicates the diameter size and the thread count. It is designed to accommodate a size 6 screw with 32 threads per inch. The “C8094-632-4” indicates the specific part number and configuration. It features a U-shaped spring steel body that clips onto the edge of a panel or sheet metal, providing a secure threaded fastening point without the need for a traditional nut. It is a Tinnerman-style spring nut made out of steel with a black phosphate finish.

U TYPE SPEED CLIPS

A U-Type Speed Clip is a fastener manufactured from spring steel that is permanently bent in the shape of a “U”. The spring action of the steel permanently holds the two sides of the “U” at a constant distance from each other. Barbs are formed on each of the four edges, above the 90° corners. The barbs are bent inward to add to the clip’s holding power when the part is set in place.

Example of a U-Type Speed Clip description:
C20285-017-3B Tinnerman Style U-Type Speed Clips / No Hole / Steel / Zinc

On this part, the “C20285-017-3B” indicates the specific part number and configuration. It is a Tinnerman-style U-type speed clip with no hole, designed to slide over the edge of a panel or sheet metal and provide a secure grip without the need for drilling or additional fasteners. It features a U-shaped spring steel body that uses tension to hold it in place and is made out of steel with a zinc finish.

HAT STYLE / AXLE CAP / PUSH ON NUTS

Hat Style / Axle Cap / Push On Nuts are most commonly used to secure wheels to axles on dollies, carts or lawnmowers or other parts to unthreaded studs. Installed using a mallet, they are meant for one-time, permanent use.

Example of a Hat Style / Axle Cap / Push On Nut description:
3/4 Hat-Style Push-On Fasteners / Steel / Zinc / Fits On 3/4" Diameter Stud / Made in USA

On this part, the “3/4” indicates the diameter of the stud it is designed to fit. It is a hat-style push-on fastener that secures onto a 3/4” diameter stud without the need for threading or additional tools. It features a raised, hat-shaped body with internal gripping teeth that resist removal once installed. It is made out of steel with a zinc finish and is manufactured in the USA.

RECTANGULAR STUD RECEIVERS

A Rectangular Stud Receiver is a one-piece, self-locking fastener made of spring steel. The perimeter of the nut is rectangular in shape with an arched base.

Example of a Rectangular Stud Receiver description:
Tinnerman-Style Rectangular Stud Receivers / Steel / Black Phos / C12002-012-4 / For 0.093 Diameter Stud | Material Thk 0.012 | Length 0.450

On this part, the “C12002-012-4” indicates the specific part number and configuration. It is designed to accommodate a 0.093” diameter stud. The 0.012” indicates its material thickness, while the 0.450” indicates its overall length. It features a rectangular spring steel body that grips the stud to create a secure fastening point without the need for threading. It is a Tinnerman-style stud receiver made out of steel with a black phosphate finish.

ROUND STUD RECEIVERS

A Round Stud Receiver is a one-piece, self-locking fastener made of spring steel. The perimeter of the receiver is round in shape with arched tabs that extend inward.

Example of a Round Stud Receiver description:
Tinnerman-Style Round Stud Receivers / Steel / Black Phos / C13727-020-4 / For 0.375 Diameter Stud | Material Thk 0.020 | OD 0.630

On this part, the “C13727-020-4” indicates the specific part number and configuration. It is designed to accommodate a 0.375” diameter stud. The 0.020” indicates its material thickness, while the 0.630” indicates its outside diameter. It features a round spring steel body that grips the stud to create a secure fastening point without the need for threading. It is a Tinnerman-style stud receiver made out of steel with a black phosphate finish.

S CLIPS

An S-Clip is a self-sufficient fastening of spring steel shaped in an “S”. Both legs (at two ends of the “S”) are turned up for easier installation. Side edges of legs include barbs to supply extra holding strength.

Example of an S-Clip description:
C52161-020-4 Tinnerman Style S-Clip Fasteners / No Hole / Steel / Black Phos

On this part, the “C52161-020-4” indicates the specific part number and configuration. It is a Tinnerman-style S-clip fastener with no hole, designed to secure two overlapping panels or sheets of material without the need for screws or additional fasteners. It features an S-shaped spring steel body that uses tension to grip both surfaces and hold them together. It is made out of steel with a black phosphate finish.

If you have additional questions about tinnerman style nuts, we’d love to be a resource for you. Contact us at [email protected], give us a call at (866) 688-2500 or use our live online chat in the upper right corner of this page!