M1.6-0.67 x 6 mm Type PT Style Thread Forming Screws / Phillips / Pan Head / Steel / Zinc

30 Degree Thread Angle Style

Product Details

Part Number: 585862 Carton Quantity: 5,000 pcs Carton Weight: 2.00 lbs
M1.6-0.67 x 6 mm Type PT Style Thread Forming Screws / Phillips / Pan Head / Steel / Zinc Please Note: Item in picture may not reflect size and finish of actual part

Technical Specs

Pricing Information

1-2 Carton Price: $408.60 / Carton of 5,000 pcs ($ 0.08172 Each)
3-4 Carton Price: $384.55 / Carton of 5,000 pcs ($ 0.07691 Each)
5+ Carton Price: $363.20 / Carton of 5,000 pcs ($ 0.07264 Each)

This product is currently out of stock. We are expecting new stock on 09/16/2026.

If you would like to be notified when this product is in stock, please submit your email address below.

Product Specs

  • Part Number: 585862
  • Product Category: Thread Forming Screws
  • Size: M1.6-0.67
  • Thread Pitch: TFS for Plastics
  • Length: 6mm
  • Head Style: Pan Head
  • Drive Style: Phillips
  • Head Diameter: 2.32mm - 2.60mm
  • Head Height: 0.90mm - 1.1mm
  • Full / Partial Thread: Full
  • Driver Size: 0
  • Material: Steel
  • Finish: Zinc
  • RoHS: On Request
  • thread_pitch: TFS for Plastics
  • full_partial_thread: Full
  • driver_size: 0

Part # Cross-Reference

  • M1.66PTPP

More About Part Number 585862

These M1.6-0.67 x 6mm Thread Forming Screws for Plastics feature a Pan Head with a Phillips Drive and are made from Steel. Thread Forming Screws create mating threads by displacing material rather than cutting it, making them useful in softer materials where strong thread engagement is desired. These Thread Forming Screws are designed specifically for plastic, forming durable mating threads while helping reduce stress in the material. They feature a Zinc Finish, which provides reliable corrosion protection for general-purpose indoor and light outdoor applications while remaining a cost-effective choice for everyday fastening needs. The Pan Head features a slightly rounded top with a flat bearing surface, offering a versatile profile commonly used in sheet metal and general fastening applications. A Phillips drive features a cross-shaped recess designed for efficient installation with standard Phillips drivers and power tools.

⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
For more information, go to www.P65Warnings.ca.gov.

TAPTITE® and PLASTITE® are registered trademarks owned by Research Engineering & Manufacturing, Inc. (REMINC). REMINC has not licensed the use of either of these trademarks to Fastener SuperStore.